Jubilee Bunting


And what Street party would be complete without the bunting.....


1.Bunting
2.Red, White & Blue Fabric Bunting

3.Made In Britain Bunting
4.Triangle Union Jack Bunting




Comments

  1. CarolC1May 20, 2012

    I love bunting too. We have just been asked to make some for our town. Got to think about that one, not sure where to start.

    ReplyDelete
  2. Dawn WoodsMay 23, 2012

    Wow Carol that is GREAT.....can't wait to see the photos....

    ReplyDelete

Post a Comment

Hi, I love to hear your views good, bad and even ugly... If you like something let me know so i can do more of it, if not, i will try and do less. Thank you SO MUCH for taking the time to comment, I really enjoy reading what you think about the blog xx

Popular posts from this blog

Tutorial: Make a Jenga Block Keychain

Image
Tutorial: Make a Jenga Block Keychain  Follow this easy tutorial to make one of these great keychains, which you can personalize with your own images. Materials: Old Jenga Blocks or other similar sized pieces of scrap wood sanded smooth Papers/Images or your choice Cording for knot at top 1 Keychain ring per keychain Drill bit (similar width to the cording), and drill Glue Woodburning tool Sharp scissors Sharp pointy object like an awl (I use a metal cake tester) X-acto knife (optional) Some kind of sealant, I used a glossy, quick dry, polyurethane First drill a hole in the block (approx 1/2" from the top). Drill straight through till the bit comes out the other side of the block. Be sure to do your drilling on a scrap piece of wood. Next, take some glue and spread it lightly on one side of the block. Place the block (the glue side) on your paper or image. You can hold the paper up to the window or other light source to see through the paper to find the best placem...
Read more

Recycled Light bulb Vase Tutorial

Image
DIY - Recycled Hanging Light Bulb Vases It’s that time again! It’s “Waste Not Want Not Wednesday” where you show off your creative tips and handmade projects and parties! Link up your blog post with a handmade project like something you made, party you hosted, a recipe, or fun tip. {anything goes} These hanging lightbulb vases are so charming and ridiculously easy. Grouped together they make quite an elegant statement! Step One: Using fine-tooth metal saw - gently saw the bottom of light bulb. Pull out the fillaments. Step Two: Using a hand held drill place metal against some scrap wood and poke two holes opposite from each other. Step Three: Lace thin wire through the holes and tie off at desired legnth. Fill with lovely blooms! Feel free to Visit the Blog | Follow on Pinterest | Follow on Facebook |  Follow on Twitter |Follow on Instagram Subscribe to Pretty Shabby UK Many Thanks to Design Sprout for the Fantastic tutorial ...
Read more