A Place to Start - June Challenge

Hi Friends

It's Challenge Day over at A Place to Start and today's theme is "Anything but a Card"












Thanks for joining me today, and why not pop over to A Place to Start and share with us your creations.



Let's connect on Instagram

Join me on Pinterest


Comments

Post a Comment

Hi, I love to hear your views good, bad and even ugly... If you like something let me know so i can do more of it, if not, i will try and do less. Thank you SO MUCH for taking the time to comment, I really enjoy reading what you think about the blog xx

Popular posts from this blog

DIY Milk Paint Recipe

Image
After the outstanding results I received with the DIY CHALK PAINT , if you read my sideboard , rocking chair or toy chest posts, you will have seen the amazing results that the chalk paint made. So this time  i thought i would test out a milk paint recipe What you need: 4 parts milk powder 1 part bicarbonate of soda 1 part pigment 6 parts cold water Patience  The method is pretty simply. All you need to do is mix the milk, bicarbonate of soda and pigment powders together then add the water and stir well. Leave the paint to sit for 1 hour then stir again and paint. (I know, i know you probably will want to get painting you project, but if you can wait – you will get better outcomes - try watching an episode of  Once Upon a Time... oh lord, my sister and i are addicted) The milk paint dries quickly so once you’ve started using it and be careful not go back over areas, as you can wipe the paint back off. Even though it is touch dry in about 15 min...
Read more

Tutorial: Make a Jenga Block Keychain

Image
Tutorial: Make a Jenga Block Keychain  Follow this easy tutorial to make one of these great keychains, which you can personalize with your own images. Materials: Old Jenga Blocks or other similar sized pieces of scrap wood sanded smooth Papers/Images or your choice Cording for knot at top 1 Keychain ring per keychain Drill bit (similar width to the cording), and drill Glue Woodburning tool Sharp scissors Sharp pointy object like an awl (I use a metal cake tester) X-acto knife (optional) Some kind of sealant, I used a glossy, quick dry, polyurethane First drill a hole in the block (approx 1/2" from the top). Drill straight through till the bit comes out the other side of the block. Be sure to do your drilling on a scrap piece of wood. Next, take some glue and spread it lightly on one side of the block. Place the block (the glue side) on your paper or image. You can hold the paper up to the window or other light source to see through the paper to find the best placem...
Read more